JLon PVC Foam Core: Complete Guide for Marine, Drone, Wind & Industrial Applications
Learn how to choose the right PVC foam core, compare materials, and get the best solution for your composite project
· Optimized for Boats, Drones & Wind Blades
· Monthly Capacity: 15,000 m³
· Fast Delivery & Custom Solutions

Factory Strength & Quality Assurance
What Is JLON PVC Foam Core?
PVC foam core is a rigid, closed-cell structural core material used in lightweight composite sandwich panels. It helps separate and support the laminate skins, providing a balance of stiffness, weight and structural performance for applications such as boatbuilding, wind energy, UAVs and industrial composites.
JLON offers PVC foam core options for different manufacturing conditions and loading requirements, including general-purpose, high-temperature and high-toughness series. Available foam cores can be supplied in various densities and processing formats for hand lay-up, vacuum infusion and other compatible composite processes.
Select the PVC foam series according to the manufacturing cycle and structural demands, then confirm the density, thickness and sheet configuration based on your design requirements.

JLON PVC Foam Series
| Comparison | General-Purpose PVC Foam | High-Temperature PVC Foam | High-Toughness PVC Foam |
| Main Difference | Balanced structural performance for general applications | Designed for higher-temperature composite processing | Higher shear strain capability for demanding impact and dynamic loading requirements |
| When to Choose | Conventional laminating and infusion without a specific requirement for elevated processing temperatures or increased shear strain | Prepreg or infusion processes requiring greater temperature capability than the general-purpose series | Marine structures where slamming, impact and deformation capacity are important design considerations |
| Density Range | 45–300 kg/m³ | 60–160 kg/m³ | 80–130 kg/m³ |
| Product Details | View General-Purpose PVC Foam | View High-Temperature PVC Foam | View High-Toughness PVC Foam |
How to Select PVC Foam Core for Your Application
| Application | Density (kg/m³) | Typical Use | Engineering Purpose / Notes |
| Marine (Boatbuilding) | 45–60 | - Small racing boats, kayaks - Superstructure of large yachts - Non-structural interior components | Designed for extreme weight reduction. Used in low-load areas to reduce overall vessel weight, improving speed and fuel efficiency. |
| 60–80 | - Hull bottom and deck of small/medium yachts and fishing boats - Sides of workboats - Secondary structures of high-speed boats | Best cost-performance range. Provides an optimal balance between weight reduction and structural strength. Most widely used density range. | |
| 80–130 | - Hull, deck, and sides of large yachts and passenger vessels - Load-bearing bulkheads - Areas supporting heavy equipment (e.g., engine foundations) | Suitable for higher load conditions. Increased density improves compressive and shear strength for larger vessels and harsher environments. | |
| 130–300 | - Critical load-bearing areas in high-performance boats - High point-load zones (mast bases, winch bases) - Local reinforcement inserts | Provides strength and stiffness close to balsa. Ideal for high-load zones while avoiding water absorption and processing issues associated with wood cores. | |
| UAV / Drone | 45–60 | - Equipment bays - Fairings | Primarily used for protection. Highly weight-sensitive applications. |
| 60–80 | - Main fuselage and arms - Fixed-wing wings / lifting surfaces | Provides a balance between lightweight and structural stiffness. ⚠ For high-speed propellers or central wing box structures, PMI foam is recommended. | |
| Wind Turbine Blades | 45–60 | - Trailing edge / aft edge - Blade tip area | Lightweight design reduces blade mass and improves energy efficiency. |
| 60–80 | - Mid shell (blade shell structure) | Provides sufficient stiffness for shell stability. | |
| 80–130 | - Main spar - Shear web | High strength and shear resistance for major load-bearing structures. | |
| — | - Blade root | Typically uses higher-strength balsa for maximum structural performance. |

PVC Foam Processing Options for Composite Manufacturing
| Scheme | Type | Description | Molding Process |
![]() | Flat Plate | There is no other post-processing. If you want curved surface, you can get it upon treating the flat plate by thermoforming. | Suitable for hand lay-up, compression molding and other processes of the flat plate with sandwich structure. |
![]() | Scrim Foam | Small squares are formed by cutting on one side of the flat plate in both directions of length and width with gluing fiberglass mesh on the other side. | Suitable for products with curved surfaces. |
![]() | Double Cuts | Cut both sides of the core material to the extent 55-60% of the thickness and the cutting positions are staggered. The amount of resin absorption is much less than that of scrim foam. | Suitable for the application with small curvature. |
![]() | Perforated Plate | Perforate holes with diameter of about 2 mm on plates. You can adjust the diameter of holes according to the thickness and density of the core material. Trapped air formed in the process of lamination can be removed from the bottom of the core material by perforating holes. Also, the resins can flow from one side of the core material to the other side. | Suitable for hand lay-up, vacuum infusion, compression molding process to improve the adhesive strength. |
![]() | Slotted Plate | Guide slots are set on the plate surface. Guide slots can be disposed in length or width direction on one side or both sides of the plate. The groove(s) can work as the flow path of resins and can remove the trapped air when using the resin vacuum infusion lamination process. | Suitable for vacuum infusion and compression molding process to produce products with large area. |
![]() | Slotted Perforated Plate | 20mm. On the basis of slotted plates, perforate holes with a diameter of 2 mm in the slots that the spacing between every two is 20 mm in the length or the width direction of the plate. | It has features of the two above core materials, suitable for vacuum infusion, compression molding and vacuum bagging process to produce large-scale products. |
How Structural PVC Foam Is Made







PVC Foam Core vs Other Core Materials
| Item | PVC Foam Core ★ | PET Foam Core | PMI Foam Core |
| Mechanical Properties | Medium | Lower (at same density) | Excellent (Best) |
| Shear Strength | Medium | Relatively low | Excellent |
| Impact Resistance | Good | Relatively low | Excellent |
| Temperature Resistance | ~ 120 °C | ~ 140 °C | ≥160 °C |
| Flame Retardant Properties | Naturally flame retardant | Requires flame retardant additives | Limited (requires modification) |
| Water Absorption | Low | Low | Higher (hydrophilic) |
| Environmental Performance | Moderate | Environmentally friendly, recyclable | Moderate |
| Process Compatibility | Hand lay-up, vacuum infusion, RTM | Hand lay-up, vacuum infusion, RTM | High-temperature processes (RTM, autoclave) |
| Typical Applications | Yachts, boats, wind blades, industrial structures | Marine interiors, rail transit, cost-sensitive structures | Aerospace, high-performance marine, UAVs |
| Price Level | Medium | Lowest | Highest (>2× PVC) |
Why Choose JLon PVC Foam Core

Stable Quality from a Reliable PVC Foam Core Manufacturer
JLON PVC foam core is produced under strict quality control to ensure uniform density, consistent mechanical properties, and reliable performance in large-scale production. This includes waterproof foam core, PVC core, and pvc foam core options.

Wide Density Range of PVC Foam Core
JLON offers a full range of PVC foam core densities from low to high, allowing customers to select the most suitable structural foam core for applications such as foam core boat building materials, drone foam, or marine foam core.

Excellent Mechanical Performance of PVC Foam Core

Strong Process Compatibility of PVC Foam Core

Customization Capability for PVC Foam Core

Competitive Price and Reliable Supply of PVC Foam Core
FAQ of JLon PVC Foam Core
-
What is the difference between General-Purpose, High-Temperature and High-Toughness PVC Foam?
General-Purpose PVC Foam offers balanced structural performance for conventional composite applications. High-Temperature PVC Foam is designed for manufacturing processes requiring elevated temperatures, while High-Toughness PVC Foam provides higher shear strain capability for applications involving impact and dynamic loading.
-
How do I choose the right PVC foam series and density for my project?
Start by considering your application, manufacturing process, processing temperature and structural loads. Select the appropriate PVC foam series first, then determine the density and thickness based on your design requirements. JLON can assist with material selection using your project specifications.
-
Can High-Temperature PVC Foam be used continuously at 160°C?
No. The 160°C figure refers to the maximum processing temperature under specified conditions, not a continuous service temperature rating. The applicable limits depend on the foam grade, processing duration and pressure.
-
When should I choose High-Toughness PVC Foam instead of General-Purpose PVC Foam?
High-Toughness PVC Foam is worth considering when greater deformation capacity and shear strain are required, particularly in marine structures exposed to slamming, impact or repeated dynamic loading. Final selection should be based on structural calculations and material test data.
-
Can different PVC foam series or densities be used in the same composite component?
Yes. Different PVC foam series or densities can be used in separate regions of a sandwich structure to balance mechanical performance, weight and cost. The design should account for load distribution, material transitions and processing compatibility.
-
Are all three PVC foam series compatible with polyester, vinyl ester and epoxy resins?
PVC foam cores are commonly used with polyester, vinyl ester and epoxy resin systems. However, compatibility should be verified for the selected series, resin formulation, curing temperature and manufacturing process before production.
-
Can JLON supply customized PVC foam sheets for different manufacturing requirements?
Yes. JLON offers various sheet thicknesses, dimensions and processing options, including grooving, perforation and scrim-backed configurations. Customization availability depends on the selected series, density and project requirements.
-
Are all PVC foam densities available from stock?
Stock availability varies by series, density, thickness and sheet dimensions. Please contact JLON to confirm available inventory, minimum order quantity and production lead time for your specific requirements.
-
Can JLON provide technical datasheets, certifications and test reports for each PVC foam series?
Yes. JLON can provide available technical datasheets and supporting test documentation for the selected PVC foam series. Please specify your required density and certification standards so we can confirm the applicable documents and their coverage.
-
Can I request PVC foam samples for testing before placing a bulk order?
Yes. JLON can arrange samples for material evaluation and manufacturing trials, subject to availability. Please share the required series, density, thickness, sample dimensions and intended testing process so we can confirm suitable options and shipping arrangements.










